FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps.

HOSE CLR W/RED TR 1/2ODX4I RBVIE

HOSE CLEAR VINL 1/2ODX3/8ID RVIG

HOSE CLEAR VINL 3/8ODX1/4ID RVGE

Latex tubing 50 feet reel i.d. X o.d. 1/4 inches x 3/8 Use for gaskets, photographic chemical transfer, tourniquet bands, and many hobby applications. Made of natural latex rubber material. Not rated for pressure; very low. Brittle at -70 degrees Fahrenheit, 180 degrees operating temperatures max. Resilient, offers tear and tensile strength. Non-toxic FDA confirming ingredients. No plasticized to migrate and cause contamination.

Elastic construction allows for use in a variety of applications, smooth interior and exterior, flexible in low temperatures. Elastic construction allows for use in a variety of applications, smooth interior and exterior, flexible in low temperatures.

Good, dependable performance marks this product as the solution for many home de-watering applications.

Elbow turns 90 deg within 4 in. One male rotating snap-lock fitting, one female rotating snap-lock fitting. For 90 deg turns, especially on the dryer.

Includes UL transition duct, 2 tension clamps and plastic preferred hood.

FDA Grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.

Positioned so that it strains out debris to prevent any from clogging downspout. No mounting hardware required, stays in place. Bulk.

FILTER SPANNER WRENCH SW-1

Connects two lengths of ducts together using clamps

Duct tubing connectors aluminum size 4 inches For flexible aluminum duct.
The Lambro 8 In. galvanized steel splice connector is ideal for effectively connecting two sections of flexible foil, flexible insulated duct or rigid pipe together. The connector is crimped on both ends with a center bead to securely fasten the sections of duct to. The connector is constructed of 30 gauge galvanized steel and is suitable for use in most heating, venting and air conditioning applications.

Semi-rigid aluminum duct is ideal for applications where building codes require use of all aluminum duct. The duct is totally non-combustible with a maximum operating temperature of 400 deg F.

Opening/closing flaps prevents outside elements from entering the vent. UV inhibitor is used to help prevent the premature fading of vent. (1) 4, white plastic louvered vent with 11 tail pipe, (1) 4 white plastic trim plate.

Plumb Pak Tailpiece Washer, Type: Beveled, 1-1/2 in, Polyethylene, For: Plastic Drainage Systems